E-Max Crown Discoloration

Issue: After firing an E-Max crown, the tip turned Ivory, but the crown remained Purple.

Follow below: Steps

Preheat Furnace Correctly:

• Ensure furnace reaches the proper firing temperature (e.g., 400°C) before loading. Avoid applying glaze before the furnace reaches the target temperature.

Glaze Application:

• As the furnace reaches 400°C, apply/spray the appropriate amount of glaze to your E-Max crown.
• Avoid applying glaze before the furnace hits the target temperature to prevent uneven melting.

Load into Furnace:

• Once glaze is applied, carefully load the E-Max crown into the furnace. Make sure the crown is placed in the correct position for even heating.